How to Root Samsung Galaxy J7 Step by Step[Trick Guide]

In this article, we show you how to Root Samsung Galaxy J7 SM-J700F. The Samsung as recently launched the two new budget mobiles under 15k i.e Samsung Galaxy J5 and Samsung Galaxy J7 having a super AMOLED display and having the 16GB internal and 1.5GB RAM.It is designed chipset of Qualcomm MSM8939 Snapdragon 615.

Note: - Trickszeal is not Responsible for any damage of your device you have to do at your OWN Risk.Before going to root your device Backup your Data.Rooting your device may lose the warranty of your device.

• Downloads Needed:-

1. Odin3_v3.10.6.zip ( Unzip it)
2. Samsung Kies
3. Twrp-2.8.7.0-j7elte.image.tar (No need to extract it)
4. Super SU 

• Device Setting Developer Option:-

1. Now go to settings>>About Phone
2. Tap on Build Number for 7 times until you receive a message.
3. Now go back to settings>>Developer Option>>USB Debugging,enable it.
4. In this Developer option, you can also find the 'OEM Unlocking' option, you need to just enable it.

• Install Driver:-

Now Install the 'Samsung KIES' and restart your PC or computer, then connect your device with USB Cable.It will configure drivers automatically.

        

• SUPER SU:-

Now connect your phone to PC via USB cable, then transfer the SUPER SU files from your PC to the external memory device.

• Install TWRP Recovery on your Samsung Galaxy J7 SM-J700F.

1. Run as the Administrator of the Odin3 v3.10.0.exe file.
2. Now click on the AP and Browse twrp-2.8.7.0-j7elte.image.tar, shown in above figure.
3. Now Switch on your device J7.
   
4. Then Press and hold the power + Volume Down + Home button at a time until it shows a Warning screen.
   
5. After this Press Volume UP button to Continue.
   
6. Now connect your phone to PC via USB cable.
7. After this, you will be able to see the ID: COM in Odin and installed properly.
   
8. Now Click on the Start button on Odin to Pass.
9. Once you Start, it will take few seconds to PASS, as shown in above fig.
   
10. Finally, Exit Odin and disconnect your device and switch it on.

• Rooting of Samsung Galaxy J7 By using the Flashing SUPER SU:-

1. First Switch of your Device.
2. Now press the Volume UP + Home + Power button at a time it shows TeamWin.
3. Tick the checkbox until it,"Never show this screen during boot again".
   
4. Now Swipe to allow Modification.
5. Now Tap on install and browse the UPDATE-SUPER SU-v2.46.zip file(Store in External memory)
6. If once you find the UPDATE-SUPER SU-v2.46.zip file and just tap on it.
7. Now Swipe again to confirm Flash.
8. Once the flashing is completed, then you will get a successful message.
9. Finally, tap on Reboot System.
10. Finally, your Samsung Galaxy J7 SM-J700F as been successfully Rooted.

To check whether your device as root access or not, you can check on 'ROOT CHECKER' app and run it on your device.

How to Change the Voices in Videos - Best Voice editing Editing Software

Have you ever try to change the voice of your Video, Now it's simple to edit the voice of your video by using a WONDERSHARE FILMORA, in this, you can change the voice pitch high, low, fast, slow.This an original Wondershare Video Editor you can download from the above link.

Click Here to Download: - WONDERSHARE FILMORA

How to Change the Voices in Videos Best Editing Step to follow:-

Step 1: - Now Add Voice or Videos 

Open the Wondershare Filmora and then add video and voice by clicking on the "Import"

on the window to import files audio or video.After import the files appear on the timeline for editing, Now the recorded audio would automatically appear on the audio track.

Step 2: - Change Voice with one Click

Whenever you double click on the added video/audio or recorded voice over on the Timeline, Now you will be opening the editing panel.You have to look options such as Speed, Volume, Fade in, Fade out and Pitch.

>>> Pitch Option:-

For both video and audio files and voice over on Timeline have that Pitch option. Now you could easily change the voice of your video or recorded voice

. By just dragging the little triangle button to the desired position. For this, the value varies from -12 to 12 dB.

>>> Speed Option:-

For this speed option, there are four settings options.The overall changing of video and audio track music files are getting affect the audio itself.

Step 3: - Video/Audio changing Export:- 

By changing the voice, it's time to save the video or audio

. All popular video formats and other mp3 formats are also support.

To do so, click "Create" and select "Format".Choose a list and 

format you want and click "Create" button. Then file will be automatically saved to your computer with some specified name.

keep visiting for latest updates

How to Root Samsung Galaxy Note 4 N910C on Android 5.1.1 Lollipop Trick

Now Samsung Note 4 as got the new unlock with Android 5.1.1 OTA Update that Samsung rolled out it for users in Poland.You can easily update your device to 5.1.1 Android Lollipop.
Note: - To use this root, ensure that your phone as Android 5.0.1 bootloader, otherwise you will encounter to infinite boot loops. Also, you keep in mind this root removes Knox Security and also install SUPERSU App, Busy box and 5.0.1 modem, Modded googymax n4 kernel.
                                                       

Warning :-   

This trick only works for the Galaxy Note 4 N910C. Rooting your device will harmful and it may lose your warranty of your device, so you have to proceed at your own risk.So tricks zeal is not responsible for any damage your device during the process.

Prerequisites :-

• USB Cable.
• Make sure that your device should have minimum 65% of battery, otherwise during the process, it will shut down.
• Enable USB Debugging on your device.Settings>>About>>Build number and tap it 7 times to unlock the Developer option.Now return to Setting>>Developer option and tick the USB Debugging Check-box.
  
• Now install the Samsung USB driver on your PC.
• Install TWRP Recovery.
•  Make sure that your device should be Backup for safe side.

Click Here For Downloads:-

Root Package >>Click Here to Download

Android 5.0.1 Bootloader>>Click Here to Download

How to Root Galaxy Note 4 N910C By Step by Step Process.

1. Now Download the root package and then transfer to your device storage.
2. Then Download & Extract the Android 5.0.1 Bootloader package, then you will find the folder in which there is an Odin flashable tar package & Odin binaries.
3. Now Boot your device and make it into Download Mode. For this
   
   • First Power off your Phone.
   • Now Press & hold the Volume Down + Power + Home button together until you get the Warning screen with Android logo.
   • Finally, Press Volume Up button to continue to the Download Mode.
   
   
   
4. Now connect your device to PC by using USB cable.
5. For Odin flash tool you have to Double-click on the Odin3 v3.09.exe file to open.
6. Now you have to flash the bootloader by loading it in the BL section tool. Now Press start.
   

   
7. Once the Bootloader is flashed, now reboot your device into the recovery mode. For this:-                   >>Power off your device.                                                                                                             >>Now Press & hold  Volume Up+ Power + Home Button together until it will show the Samsung logo and then release the Power button.Now for recovery menu, you have to Hold the Volume and Home Buttons.
8. Finally, in the recovery mode, you have to simply flash the root package from the Install menu.
9. Finally, Reboot your device if the Flashing is completed.
10. That's it your device is now rooted successfully.                   

[GUIDE]How to Enable Flash Notification Like IOS

Hello guys, in this article we show you how to enable a Flash Notification, Actually, any device doesn't provide a visual notification to users and other than that the screen turning on, so for those who want the notification can turn on this features.

For this Flash Notification you need to follow some steps given bellow:-

Step 1: - First you need to Download SQLite Editor on your device.
Step 2:- Now open it and choose setting storage >> Setting.db>>system.
Step 3: - Now find"Flash Notification".
Step 4: - After finding the notification now, Edit value from 0 to 1 in your device.
Step 5: - Now finally Save and Restart your device.

Here my device is S4 LTE-A SHV-E330L and running on stock 5.0.1.

Note it's not working for the Albe Rom v6.

[Guide]How to Root Xiaomi Redmi 2 With CWM Recovery Install

In this article, we show you how to Root the New Redmi 2 / prime in an easy way
to root your device.Your device will root through a Stock MI recovery, but this is not a
Native Root.From this a new app named as SuperSU which gives the Root Permission to your device.

Note:- 

Trickszeal is not responsible for any damage to your device, you have to do at your Own
Risk.Before going to root your device Backup the Data.By Rooting it may void your Warranty of your device.

Prerequisites:-

• Xiaomi Redmi 2 device.
• PC.
• USB cable.
• Internet Connection.

How to Root Xiaomi Redmi 2 by following steps:-

FLASHING CWM ON YOUR DEVICE.

Step 1: - First you need to get the "ADB" and "fastboot" tools.

Click Here to Download

Step 2: - Now Extract the downloaded file on your desktop after that download recovery.image.extract

and place it in the same folder.

Click Here to Download CWM Recovery.img

Step 3: - Now Press and Hold Shift button and right click in the empty or blank area of the folder and click on "open command prompt window here".Then the command prompt will open, see below image for reference.

Step 4: - Now download the SuperSU.zip file and store it in your SD-Card of your device.

Click Here to Download 

Step 5: - Next turn off your Redmi 2, and wait until it vibrates. After it vibrates now press

and hold the "Volume down and Power" keys together until it boots into the "fastboot mode".Now connect your device(Redmi 2)to your PC or Computer through an USB cable in fastboot mode itself.

Step 6: - Now in command prompt windows will executes the following command, if it once you enter that command, you will get an non-empty name for that device meaning the device is to be connected.

proceed to enter the next command.

Step 7: - Next Execute the below command to flash the Recovery img(this will flash CWM recovery for flashing SuperSU.zip with CWM.) 

Step 8: - Now your device in CWM Recovery Mode, now you have to flash the SuperSU.zip that you have stored in your SD Card and then select it and install it SuperSu.zip.

Step 9: - After successful flash now reboot your device, after that rebooting you will fine SuperSU app on your device, that means your device as been successfully Rooted.

Note: - Here you will not get into the CWM Recovery after boot because that was an a temporary installation, to permanently install CWM recovery to flash it with CWM Recovery Guide .

Keep visiting for latest updates.

How to Root Samsung Galaxy J5 Step By Step

                                 Samsung Galaxy J5

Welcome to Trickszeal, in this site we provide the latest updates for all devices.Now in this blog, we explain you, How to Root the New Samsung Galaxy J5.The highlight of this device, which supports 4G network and is a 13 MP rear camera with LED Flash and 5 MP front camera.The device runs on the Android 5.1 Lollipop and with 1.5 GB of RAM. It runs on 1.2 GHz Quad Core Qualcomm Snapdragon processor.

Note:-

Trickszeal is not Responsible for any damage of your device you have to do at your OWN Risk.Before going to root your device Backup your Data.

How to Root Samsung Galaxy J5 Step by Step process.

1)   First Download the Super-Root.apk From the above link.

        http://downloadsafe.org/file/0yF980  

2)   An easy way to Download of Super-Root.apk from above link video.

       http://game-hack-video.com/videos.html

3)   Now connect your device to your Computer by using the USB Cable.

4)   The Downloaded Super-Root.apk, Copy over to the root of your SD Card.

5)   If once's it is completed the copying, directly disconnect your device from the computer.

6)   Now Head on to Menu>>setting>>security on your device and enable the Unknown sources option.

7)   Now open the File Manager on your device and then install the App that you have copied earlier it to your device.

8)   Once the App is installed, now launch it from your App Drawer.

9)   Now select and install the 'Super SU' from the Dropdown Menu.

10) Select it and Exploit, and tap on it in the app.

11) This app begins Rooting of your device and takes few minutes to complete it.

12) Finally, Reboot your device once it as been rooted the device.

13) Yes, you have all Done, Excellent, that your device is rooted successfully.

14) Now you can see the SUPERSU App in your App Drawer.

        Thanks for visiting our site, Keep visiting for the latest updates.

How to Root ASUS ZenFone 5 Kitkat 4.4.2[Guide]

In this article, we show you how to Root the New ASUS ZenFone 5 in an easy way.Here you can update your Asus phone to 5.0 Lollipop upgrade.It is specially designed phone with 2GB Ram and 1.2GHz Processor, it is a multitasking device.

Note :- 

Trickszeal is not liable for any Damage to your Phone, You have to do at your Own Risk by following the Steps.It may void the warranty of your device.Before Rooting the Device you need to Backup your Data.

Important Points:-

• Rooting of your device void the manufacturer's warranty.
• Your Device(phone) must charge at least 80%  for better performance.
• Backup all the Data of your device before Root.

Required :-

1. Computer (PC).
2. Root Z5 KitKat V2.
3. Intel Drivers.
4. USB Cable.
5. SuperSU File.

How to Root ASUS ZenFone 5 Step by Step Process.

1. Download and Install the Intel Driver on your Computer and Extract it to Install.
   
   
   
2. After completing the installation process, connect your device to PC by using USB cable.You have to Enable Debugging mode to do it go to settings>>About>>Software information>>Build number[you need to tap for 7 times to get enable developer option]then, now you have to go back to Settings>>Developer options>>USB Debugging by enable or not check it.
3.  After it, Go to downloaded rootz5 kitkatv2 on your computer and then click on Files>>Right click>>Click on open command window here.
   
   
   
4. After that Command window will prompt.Then you have to type "ADB devices" and hit enter.It shows left side is your serial no. And then the right side is the word "device" it means that you are good to go.
   
5. If the word shows ' unauthorized ' instead of 'device' that means you are not good to go further. so,n ow unplugged your device from computer and then reconnect your device again.After it shows a prompt from your phone will appear on screen.Just check always allow to continue further.
   
6. Now open the '' rootz5kitkatv2 '' that you have downloaded file.Now Double click on the ''Root-ZenFone5-ww'' or "root-zenfone5-en".
7. After this bat file will open and, here the rooting process is now starting.It takes 4 to 7 minutes to reboot.You need to press any key to continue.
   
8. After completing the last reboot, you can check your app drawer iof you can see the SuperSU app, Congrats your device is now rooted.
   
9. For root access OTA updates, go to SuperSU>>settings>>ENable pro.Once it done, go back again SuperSU>>settings>>Enable Survival Mode.
   
10. Congrats your device have been successfully Rooted.You can check your device is rooted by checking Root Checker App.

How to Root MOTO G 3rd GENERATION 2015 Guide

Hi,everyone in this Article we show you How to Root the MOTOROLA MOTO G 3rd 
GENERATION which is newly released in 2015.This phone is specially design and also some new features added in this,You can update it to Lollipop 5.0.In this article we show you step by step process of Rooting Guide.

Prerequisites Need :-

• You have to Unlock the Bootloader for your Moto G 3rd gen.
• You need to install the Motorola Drivers in your Computer.
• Add ADB Fastboot and also for flashing the TWRP Recovery.

Note:- We are not responsible,of damage of your device,You have to do at your OWN Risk and must follow the following instructions properly.

How to Root Motorola Moto G 3rd Generation 2015 with simple steps:-

1. You need to Download the latest TWRP recovery of Motorola (Click Here).
2. Now Download Motorola USB Drivers (Click Here to Download).
3. Install Minimal Fastboot on PC or Computer (Click Here to Download).
4. Download latest SuperSUv2.46.zip (Download).
5. Unlock your Moto G 3rd Gen Bootloader .
6. After unlocking Bootloader, you need to copy the superSU.zip files to your smartphone,in internal storage.
   
7. You need to turn off your Device,by holding [Volume Down button and Power Button] at a time for upto 5 sec's you will see Bootloader.
8. Now pug your device to your PC.
   
9. Now you have to copy TWRP file,and paste it in mfastboot folder.
10. Now open the mfastboot folder,where you have installed earlier.Now hold shift key and right click on mouse in any blank space,it open an command window and click on that.
    
11. In that Type below code in the command prompt and enter .
    
12. That's it you have successfully flashed TWRP recovery to your Moto G 3rd Gen,and its running on android Lollipop.
13. After it press volume Down button and select recovery option by pressing volume up button.
    
14. Now in Recovery select install from sdcaard option by using volume Down button to navigate and power button to select it.  
15. Then select install ZIP file from SD-card then you have to select 0 (o is the location of internal storage) and then select SUPERSU.zip file and flsh it by pressing Yes option by power button.
16. Now select it to install,and wait for few seconds to installation it.
17. Select Advanced >> Reboot to Bootloader.                                                                                     NOTE:- Select NO for Supersu to fix issue.
18. Now Select Reboot Device.
19. That's it congratulations, your device as Successfully Rooted Moto G 3rd gen 2015.  

 Keep Visiting for Latest Updates